Membuat MikroTik RouterOS™ Menjadi Router Server

[re3@MikroKeTik] > interface print
Flags: D - dynamic, X - disabled, R - running, S - slave
# NAME TYPE MTU
0 R WAN ether 1500
1 R LAN ether 1500

[re3@MikroKeTik] > ip address print
Flags: X - disabled, I - invalid, D - dynamic
# ADDRESS NETWORK BROADCAST INTERFACE
0 117.74.124.58/30 117.74.124.56 117.74.124.59 WAN
1 192.168.10.200/24 192.168.10.0 192.168.10.255 LAN
2 192.168.8.200/24 192.168.8.0 192.168.8.255 LAN

[re3@MikroKeTik] > ip route print
Flags: X - disabled, A - active, D - dynamic,
C - connect, S - static, r - rip, b - bgp, o - ospf, m - mme,
B - blackhole, U - unreachable, P - prohibit
# DST-ADDRESS PREF-SRC G GATEWAY DISTANCE IN..
0 A S 0.0.0.0/0 r 117.74.124.57 1 WAN
1 ADC 117.74.124.56/30 117.74.124.58 0 WAN
2 ADC 192.168.8.0/24 192.168.8.200 0 LAN
3 ADC 192.168.10.0/24 192.168.10.200 0 LAN

[re3@MikroKeTik] > ip dns print
primary-dns: 202.169.224.200
secondary-dns: 0.0.0.0
allow-remote-requests: yes
max-udp-packet-size: 512
cache-size: 2048KiB
cache-max-ttl: 1w
cache-used: 32KiB

[re3@MikroKeTik] > ip firewall nat print
Flags: X - disabled, I - invalid, D - dynamic
0 chain=srcnat action=src-nat to-addresses=117.74.124.58 out-interface=WAN
[re3@MikroKeTik] >

berikut adalah langkah2nya :

1. Setting ke dua LAN card di computer
kita beri nama dulu setiap LAN cardnya kali ini kita akan memberi nama dengan
Ether1 = LAN
Ether2 = WAN
nah caranya adalah seperti ini :

[re3@MikroKeTik] > interface print Flags: D - dynamic, X - disabled, R - running, S - slave # NAME TYPE MTU 0 R ether1 ether 1500 1 R ether2 ether 1500 [re3@MikroKeTik] > interface set ether1 name=WAN [re3@MikroKeTik] > interface set ether2 name=LAN [re3@MikroKeTik] > interface print Flags: D - dynamic, X - disabled, R - running, S - slave # NAME TYPE MTU 0 R WAN ether 1500 1 R LAN ether 1500 [re3@MikroKeTik] >

2. Konfigurasi Ethernya :

[re3@MikroKeTik] > ip address add address=117.74.124.56/30 interface=WAN [re3@MikroKeTik] > ip address add address=192.168.8.0/24 interface=LAN [re3@MikroKeTik] > ip address add address=192.168.10.0/24 interface=LAN [re3@MikroKeTik] > ip address print Flags: X - disabled, I - invalid, D - dynamic # ADDRESS NETWORK BROADCAST INTERFACE 0 117.74.124.58/30 117.74.124.56 117.74.124.59 WAN 1 192.168.10.200/24 192.168.10.0 192.168.10.255 LAN 2 192.168.8.200/24 192.168.8.0 192.168.8.255 LAN

3. Konfigurasi Gateway
misalkan kita mendapatkan gateway dari ISP : 117.74.124.57
maka kita setting dengan cara sebagai berikut

[re3@MikroKeTik] > ip route add gateway=117.74.124.57 [re3@MikroKeTik] > ip route print Flags: X - disabled, A - active, D - dynamic, C - connect, S - static, r - rip, b - bgp, o - ospf, m - mme, B - blackhole, U - unreachable, P - prohibit # DST-ADDRESS PREF-SRC G GATEWAY DISTANCE IN.. 0 A S 0.0.0.0/0 r 117.74.124.57 1 WAN 1 ADC 117.74.124.56/30 117.74.124.58 0 WAN 2 ADC 192.168.8.0/24 192.168.8.200 0 LAN 3 ADC 192.168.10.0/24 192.168.10.200 0 LAN [re3@MikroKeTik] >

4. Konfigurasi DNS :
saya akan coba menggunakan 1 DNS :

[re3@MikroKeTik] > ip dns set primary-dns=202.169.224.200

nah DNSnya coba kita cek :

[re3@MikroKeTik] > ip dns print primary-dns: 202.169.224.200 secondary-dns: 0.0.0.0 allow-remote-requests: yes max-udp-packet-size: 512 cache-size: 2048KiB cache-max-ttl: 1w cache-used: 53KiB

5. Konfigurasi NAT
kemarin kita sudah bahas ya :

[re3@MikroKeTik] > ip firewall nat add action=masquerade out-interface=WAN ch ain=srcnat [re3@MikroKeTik] > ip firewall nat print Flags: X - disabled, I - invalid, D - dynamic 0 chain=srcnat action=src-nat to-addresses=202.169.224.200 out-interface=WAN

Kita sudah mengeset Mikrotik menjadi router
dan siap digunakan sebagai perantara dari ISP untuk menshare ke jaringan kita.
selamat mencoba...

Thanks To : cybermuttaqin n reza